Click Start> Programs> Dediprog> Dediprog Engineering. (If the device remains undetected, please install the Dediprog device driver)ĥ.
Connect the Dediprog SF100 programmer to the system on which the Dediprog software is running. Connect the SF100 Dediprog Programmer with the 2x5 cable to the Intel Galileo Board.Ĥ. Remove all power supplies from the Intel Galileo motherboard, USB and power.ģ. Download and install the Dediprog software.Ģ. An incorrect MAC address is not a problem, except when repairing two Intel Galileo motherboards using this method, which are connected to the same network.įollow the steps below to flash the new firmware onto your device.ġ. Note that changing the firmware using this method will result in an incorrect Mac address. The following things are required for this In this case you have to flash a new firmware. If you see the message 'ASSERT_EFI_ERROR', the firmware is damaged. To do this, connect a serial cable and open the BIOS. The following describes the process for repairing a bricked or unresponsive Intel Galileo board.Ĭheck whether your firmware is damaged before flashing new firmware on the Galileo board. If your Intel® Galileo board stops responding, you should check the Windows * com driver.
